By the end of this course you should be able to:

• Identify the various components of a NetApp storage environment
• Install and perform the setup configuration of Data ONTAP
• Perform basic administration on a storage system
• Explain and configure physical and logical storage
• Identify and configure client protocols
• State virtualization techniques available in Data ONTAP
• Describe Snapshot copies and space consumption in Data ONTAP
• Discuss backup methods available in Data ONTAP

Module 1: The NetApp Storage Environment

• Identify the key features and functions of NetApp storage systems
• Describe the advantages that a NetApp storage system provides
• Distinguish between network-attached storage (NAS) and SAN topologies
• Describe NetApp Unified Storage Architecture
• Access the NetApp Support site to obtain software and hardware documentation

Module 2: WAFL Simplified

• Describe how data is written to and read from WAFL (Write Anywhere File Layout) file system on a volume
• Explain the WAFL file system concepts, including consistency points (CPs), RAID management, and storage levels
• Describe how RAID is used to protect disk data
• Explain how the WAFL file system processes write and read requests

Module 3: Basic Administration

• Connect remotely to a FAS system by using the console and a remote host
• Access NetApp System Manager to the administrator a storage system
• Execute commands by using the console, a remote host and NetApp System Manager
• Use commands to analyze a FAS system
• Configure and manage the NetApp AutoSupport tool for a FAS system

Module 4: Physical Storage

• Describe Data ONTAP RAID technology
• Identify a disk in a disk shelf based on its ID
• Execute commands to determine a disk ID
• Identify a hot-spark disk in a FAS system
• Describe the effects of using multiple disk types
• Create a 32-bit aggregate and a 64-bit aggregate
• Execute aggregate commands in the Data ONTAP operating system
• Calculate usable disk space

Module 5: Logical Storage

• Explain the concepts related to volumes in the Data ONTAP operating system
• Define and create a flexible volume
• Execute vol commands
• Define and create Qtrees

Module 6: Administration Security

• Restrict administrative access
• Restrict console and NetApp System Manager access
• Configure a client machine as an administration host to manage a storage system

Module 7: Networking

• Identify the configuration of network settings and components in the Data ONTAP operating system
• Explain and configure name resolution services
• Configure routing tables in the Data ONTAP operating system
• Define and create interface groups
• Discuss the operation of virtual LANs (VLANs) and how to route them

Module 8: NFS

• Explain NFS implementation in the Data ONTAP operating system
• License NFS on a storage system
• Explain the purpose and format of /etc/ exports
• List and define the export specification options
• Describe the use of the export FS command
• Mount an export on a UNIX host

Module 9: CIFS

• Describe the CIFS environment
• Configure the storage system to participate in the CIFS environment
• Share a resource on the storage system
• Map a drive from a client to the shared resource on the storage system

Module 10: NAS Management

• List some security methods for protecting data
• Explain and configure a security style setting for a volume and a qtree
• Describe methods of tracking and restricting storage usage
• Explain, create, and manage quotas
• Explain and configure the Data ONTAP FPolicy file-screening policy

Module 11: SAN

• Explain the purpose of a SAN
• Identify supported SAN configurations
• Distinguish between Fibre Channel (FC), Fibre Channel over Ethernet (FCoE) and iSCSI protocols
• Define a LUN and explain LUN attributes
• Use the LUN setup command and NetApp System Manager to create iSCSI-attached LUNs
• Access and manage a LUN from a Windows host
• Define SnapDrive data management software and its feature

Module 12: Snapshot Copies

• Describe the function of Snapshot copies
• Explain the benefits of Snapshot copies
• Identify and execute Snapshot commands
• Create and delete Snapshot copies
• Configure and modify Snapshot options
• Explain the importance of the .snapshot directory
• Describe how Snapshot technology allocates disk space for volumes and aggregates
• Schedule Snapshot copies
• Configure and manage the Snapshot copy reserve

Module 13: Space Management

• List the storage efficiency techniques that are available within the Data ONTAP operating system
• Identify the factors that impact space consumption in the Data ONTAP operating system
• Describe how and when a volume consumes space from the aggregate that contains it
• Explain how to guarantee writes for a file
• Explain how the Data ONTAP operating system can provide space to a full volume
• Identify the deduplication and compression techniques that are available in the Data ONTAP operating system

Module 14: High-Availability

• Describe high-availability (HA) solutions
• Discuss how HA increases the reliability of storage
• Define HA controller configuration
• Describe the three modes of HA operation with an HA pair
• Analyze how HA affects clients protocols during failover and giveback operations

Module 15: Virtualization Solutions

• Describe how to virtualize a storage controller by using MultiStore software
• Configure MultiStore software
• Assign client protocols on MultiStore software

Module 16: Backup and Recovery Methods

• List the methods available to back up and recover data
• Use ndmp copy to process full and incremental data transfers
• Discuss dump and restore
• Describe, enable, and configure Network Data Management Protocol (NDMP) on a storage system

Module 17: Data Collection Tools

• Use the sysstat, stats, and statit commands
• Describe the factors that affect RAID performance
• Execute commands to collect data about write and read throughputs
• Execute commands to verify the operation of hardware, software, and network components
• Identify commands and options that are used to obtain configuration and status

Module 18: Data ONTAP Upgrades

• Access the NetApp Support site for the following documents:
  • Data ONTAP Upgrade Guide
  • Data ONTAP Release Notes
• Use a configuration worksheet to collect data for installation
• Describe how to perform Data ONTAP software upgrades and reboots
• Use the setup command to configure a storage system

Lab Exercises

• Lab 1-1 Identify the exercise environment
• Lab 1-2 Explore the NetApp support site
• Lab 2-1 Explain how the Data ONTAP operating system writes data
• Lab 2-2 Explain how the Data ONTAP operating system reads data
• Lab 3-1 Log in to the exercise environment
• Lab 3-2 Install System Manager
• Lab 3-3 Add a storage system to NetApp System Manager
• Lab 3-4 Use the CLI to access a storage system
• Lab 3-5 Explore the Help command and privilege levels
• Lab 3-6 List the options on a storage system
• Lab 3-7 From the CLI, examine the system configuration of a storage system
• Lab 3-8 Use NetApp System Manager to configure DNS
• Lab 3-9 Use system manager to configure the AutoSupport tool
• Lab 4-1 Exploring the current disk configuration
• Lab 4-2 Understand the impact of disk scrub on a storage system
• Lab 4-3 Run the storage configuration wizard
• Lab 4-4 Use NetApp system manager to create a 64-bit aggregate
• Lab 4-5 Use the CLI to create a 64-bit aggregate
• Lab 4-6 Use the CLI to create a 32-bit aggregate and upgrade to 64-bit
• Lab 4-7 Cause a disk to fail
• Lab 4-8 Add disks to an aggregate
• Lab 5-1 Use system manager to create a volume
• Lab 5-2 Resize a volume
• Lab 5-3 Delete a volume
• Lab 5-4 Create qtrees
• Lab 5-5 Delete qtrees
• Lab 6-1 Create an administrative user account
• Lab 6-2 Use the CLI to configure administrative security
• Lab 6-3 Log in with a new user account
• Lab 7-1 Use the System Manager to configure network settings
• Lab 7-2 Use the CLI to configure network settings
• Lab 7-3 Use the CLI to create a single-mode interface group
• Lab 7-4 Use the CLI to create a multimode interface group
• Lab 8-1 Use NetApp System Manager to license NFS
• Lab 8-2 Use NetApp System Manager to export a volume
• Lab 8-3 Use the CLI to export a volume
• Lab 8-4 Mount exports from an administration host
• Lab 9-1 Use NetApp System Manager to license CIFS service
• Lab 9-2 Use NetApp System Manager to configure CIFS service
• Lab 9-3 Create a window domain user
• Lab 9-4 Use the CLI and NetApp System Manager to view and create shares
• Lab 9-5 Create a new share with computer management
• Lab 9-6 Map shares to drive letters
• Lab 9-7 Modify user permissions
• Lab 9-8 Display CIFS sessions
• Lab 9-9 Configure SMB 2.0 protocol
• Lab 9-10 Terminate CIFS sessions
• Lab 10-1 Create and manage quotas
• Lab 10-2 Create a quota report
• Lab 10-3 Modify the /etc/quotas file and implement quota changes
• Lab 10-4 Use the CLI to create qtrees and quotas for the qtrees
• Lab 10-5 Create a native file-blocking policy
• Lab 11-1 License and start the iSCSI service
• Lab 11-2 Configure iSCSI on Windows Server 2008 R2
• Lab 11-3 Use NetApp System Manager to create a LUN
• Lab 11-4 Use the CLI to create a LUN
• Lab 11-5 Access LUNs from Windows Server 2008 R2
• Lab 11-6 Nondistributively move a volume that contains a LUN
• Lab 12-1 Use NetApp system manager to create a SnapShot copy
• Lab 12-2 Restore a windows file from a SnapShot copy
• Lab 12-3 Restore a Linux file from a SnapShot copy
• Lab 12-4 Use NetApp system manager to manage SnapShot copies
• Lab 12-5 Restore a file by using the windows previous version tool
• Lab 12-6 License and configure SnapRestore technology
• Lab 12-7 Revert a volume using SnapRestore technology to restore a volume
• Lab 12-8 Use SnapRestore technology to restore a file
• Lab 13-1 Explore volume space consumption
• Lab 13-2 Explore file space consumption
• Lab 13-3 Configure deduplication
• Lab 15-1 Create two MultiStore systems with separate IP aliases
• Lab 15-2 Create a CIFS share on a MultiStore system
• Lab 15-3 Create an iSCSI LUN on a MultiStore system
• Lab 16-1 Copy a volume by using the NDMPCOPY command
• Lab 17-1 Identify the commands that you can use to troubleshoot and solve problems
• Lab 17-2 Run the statit command on a storage system
• Lab 17-3 Run the stats command on a storage system

• Customers
• Employees
• Partners

Students who attend this course should have a background in system administration for UNIX or Microsoft Windows operating systems and/or Data ONTAP 7-Mode Fundamentals (WBT).